Advice for JAWS users

Switch to a more accessible forum view

1. After following a link to a forum, display the list of links (Insert + F7).
2. Tab and cursor will put links in alphabetical order.
3. Press the letter S until you hear "Switch to simple view" and press enter. This is a toggle which switches between ‘standard view’ and ‘simple view’.

Finding the list of discussions

1. Go to the top of the page (Ctrl + Home).
2. Press the letter N to skip past several sets of links until the forum name is spoken.
3. Press T until JAWS indicates there is a table. It is likely to say ‘column 1, row 1’. There will be five columns and a number of rows. The column headings are ‘Discussion’, ‘Unread’, ‘Last post’, ‘Posts’ and ‘Started by’. Each of these is announced as a link which can be used to change the order of the table rows. By default the rows are ordered by ‘Last post’.
4. Use Alt + Ctrl and use arrow keys to move around this table.
5. Alt + Ctrl + Home will take you to column 1.
6. The names of discussions are links in column 1. Press Enter on the name of the discussion you want to read.
7. Column 5 contains the names of the people who started each discussion. The links on the names take you to their profile, but not everyone chooses to make this visible.

Reading discussions

On a discussion page, each post starts with a heading: press letter H to jump through the headings.

Below each post is a number of links, which will include ‘Permalink to post x’ and ‘Reply to post x’. Other links may include ‘Flag post’, ‘Next unread’, ‘Previous unread’ and ‘Parent’.

After you have visited a discussion page once, all the posts will be ‘collapsed’ so that only the first line of each post is available. To expand an individual post, go to the ‘Expand post’ link at the end of the first line. Note that JAWS may announce a lot of orientation information before it reads the post you’ve just expanded.

You may find it easier to get an overview of the content of the forum when posts are collapsed. To collapse all posts use the ‘Collapse all posts’ link. You may find it easier to navigate and reply to posts when posts are expanded. To expand all posts use the ‘Expand all posts’ link.

Replying to a post

1. To reply to a post use the ‘Reply to post x’ link at the end of the post. You may need to cursor down to find it, or you can use the list of links (Insert + F7). Note that posts may be displayed collapsed or expanded. The ‘Reply to post x’ links are only available when a post is expanded.
2. In order to reply to a post you need to expand it first so that the ‘Reply to post x’ link is available. As described above, you can choose whether to expand an individual post, or use the ‘Expand all posts’ link.
3. After operating a ‘Reply to post x’ link, your screen reader may start to talk at length. Interrupt it and press F. You will need to decide whether you want to enter a subject line for your post. In most cases this is not necessary as the overall discussion already has a subject line. There are different instructions below for either entering a subject or not.
4. If you don’t want to enter a subject, press letter F until you hear "Change subject (optional)", then press letter F again to jump to the next form field, which is where you type the text of your reply. This field does not have a useful label and so JAWS may just say "Edit". If JAWS says "Edit, type in text" ,you are ready to type your required subject in the field. If not, press Enter to use forms mode, then type in the text of your post.
5. If you do want enter a subject, press letter F until you hear "Change subject (optional)". If JAWS just says "Edit" you need to press enter to use forms mode. If JAWS says "Edit, type in text" you are ready to type your required subject in the field.
6. Press Tab once to get out of the subject field, you will hear "HTML editor help link graphic" then press letter F to jump to the next form field, which is where you type the text of your reply. This field does not have a useful label and so JAWS may just say "Edit". Again if JAWS just says "Edit" you need to press enter to use forms mode. If JAWS says "Edit, type in text" you are ready to type the text of your post.
7. After typing the text of your post, press Tab once to get out of the editing area. At this point the focus may move out of the edit field and you will hear "Number ALT plus x link" or you may find that the focus moves to the address bar. It is not known what causes this issue. Below are instructions for each case.
8. If you hear "Number ALT plus x link", press B until JAWS says "Post reply button", then press enter. Note you may hear three "Browse" buttons: these are for adding attachments.
9. If the focus moves to the address bar, press tab to move through the browser buttons until you hear the "Skip to content" link, which indicates you are at the top of the page. Then press B until you hear "Post reply" and press Enter.
10. Pressing Enter on the 'Post reply' button sends your post to the forum and returns you to the discussion page.
11. To check your post has been sent to the forum, open the list of headings (Insert + F6) and press the initial letter of your first name to jump through all your posts. Your last post will be the one with the highest number associated with your name, e.g. "Jeffrey Bashton, Post 10".
12. You can now continue to read that discussion.
13. If you want to return to the list of discussions use the link that contains the name of the forum.

Starting a new discussion

1. Go to the top of page (Ctrl + Home).
2. Press letter B until JAWS says: "Start a new discussion button", and press the Enter key.
3. The focus should be on the subject field for your post, if JAWS says "Edit, type in text" you are ready to type your required subject in the field. If JAWS does not say "Edit, type in text", press Enter to use forms mode, then type in the field.
4. If the focus is not on the subject field, go to the top of the page (Ctrl + Home) then press letter F (forms) until JAWS says "Subject graphic required field". If JAWS says "Edit, type in text" you are ready to type your required subject in the field. If not, press Enter to use forms mode, then type in the field.
5. Press Tab to get out of the subject field, then press letter F to jump to the next form field, which is where you type the full text of your post. This field does not have a useful label and so JAWS may just say Edit. Again, if JAWS says "Edit, type in text" you are ready to type your required subject in the field. If not, press enter to use forms mode, then type in the text of your post.
6. After typing the text of your post, press tab once to get out of the editing area (you may hear "Alt + X"), then press B until JAWS says "Post discussion button", then press Enter. This sends the discussion to the forum.

Attaching a document to a post

1. A document can be attached to a post just before sending the post. This can be done when creating a discussion, or when replying.
2. After typing your post and pressing B to navigate through the buttons, press Enter on the first ‘Browse’ button. This will open the ‘Choose file’ dialog box of the browser. Navigate to the file you wish to attach and press Enter.
3. Then press Tab to get out of the attachment field, and press B until you get to the 'Post reply' or 'Post discussion’ button (depending on the context). This will take you to the discussion page.
4. There will be a link to your attachment above the text of your post.