TM470 is the Open University’s Computing and IT project module. It is what is called a capstone module, which is studied towards the end of the Q62 Computing and IT BSc qualification. It is an important element, since it is linked to the degree being recognised by the British Computer Society (BCS)
If you study this this module, you are required to carry out a substantial project which demonstrates your learning that has taken place on earlier modules. It is also used to develop your project management skills. Given the final output from the module is a project report TM470 also helps to develop your writing skills.
Like many other modules, TM470 is assessed through a series of learning outcomes. To pass the module, you must demonstrate that you have met these outcomes. This means that you need to provide sufficient evidence in your project report to ensure that the examiner can see that you meet all the criteria that are embodied within those outcomes.
A fellow tutor has described TM470 as a bit like a very long assignment (or end of module assessment). Every tutor marked assessment (TMA) is designed to help you to move towards the writing of your end of module assessment. As you study the module, it is recommended that you review the learning outcomes of each TMAs. Different TMAs will be assessing different learning outcomes. In turn, this will take you to the EMA, and its learning outcomes.
What follows is a brief summary (and my own interpretation) of the learning outcomes that relate to the module EMA, which is the same thing as the project report. A full summary of the learning outcomes and the accompanying assessment criteria is, of course, available through the module website.
Before looking at all the outcomes, I should note that these are my own notes, and my own opinions, rather than that of the module team. Always refer to the module team materials for official guidance.
Interpreting the TM470 Learning outcomes
LO1: Demonstrate your understanding of technical concepts relevant to your project
I have paraphrased this learning outcome from the original version: demonstrate and apply a systematic understanding of the fundamental technical concepts and principles relevant to your project. In other words: you need to do stuff to show what you have learnt from your earlier studies. There is an implicit link between this learning outcome, and learning outcome 11.
LO2: Identify and refine the goals and content of your project
This is all about the aims of your project. Does it solve a specific and easily defined problem that can be described in a few concise sentences? A quick check is: does it make sense if you explain your project idea to someone who doesn’t know what you have been studying? Does it solve a real need? Do refer to the module guidance about what constitutes a good project aim and idea.
LO3: Skills, resources and activities
The full outcome is: identify, list and justify the resources, skills and activities needed to carry out the project successfully. Another part of this outcome is: identify and address any associated risks. If there evidence of each of these elements? Do you consider what resources you need, such as software, or people? Also, how about risks? Is there evidence of how you have considered risks? Are these risks sensible?
LO4: Gather, analyse and evaluate relevant information
In my eyes, this theme cross cuts a couple of sections. Is there evidence of your reading in your report, by way of a literature review section? Also, when it comes to make decisions about what to do with a potential design, have you documented what you think is important. In other words, is there enough information that enables the reader of your project report to understand the story of what was done within your project?
LO5: Critically review how you have tackled the project
This outcome is one of the two outcomes that is all about reflection. If you don’t get everything working as you had hoped, or things didn’t go to plan, don’t worry. Instead, do tell the examiner about it. Importantly, tell them why you thought it didn’t go well, and what you have learnt from it. Also, do assess whether you felt your original plans were appropriate. During the planning of your project, thinking about risks is important. Did you go overboard on your risk planning?
LO6: Make effective use of a variety of information sources
This outcome is linked to LO4, but it is more about your reading, and how what you have read has informed what you have done. You also need to demonstrate that you have drawn on sources that have academic credibility. Whilst blog posts (such as this one) can be useful, they don’t hold as much weight as books or formal articles. An element of the project report is to demonstrate not only your practical skills, but also your academic skills. In turn, you need to make sure you reference everything clearly.
LO7: Communicate clearly
The full title of this outcome is: communicate information, ideas, problems and solutions clearly. In other words, you must demonstrate that you’re able to write a well written report that describes what you’ve done. A really useful bit of advice I was once offered was: “make sure what you write is as interesting as it can be”. Academic writing, whilst formal, doesn’t have to be boring. Put a bit of yourself into your writing, especially when it comes to the reflection section.
LO8: Learn independently and reflect on what has been done
This outcome is all about reflection. When looking back across your project, it is okay to get a bit more personal. This outcome is all about saying what you felt went well and what went badly, what you have learnt, and whether there were any surprises. Also, do you now know something new about yourself and how you work, than you did before?
LO9: Plan and organise your project work
The full outcome is: plan and organise your project work appropriately, and keep systematic records of plans, progress and outcomes. This outcome is linked to learning outcome 3, which is about resources, activities and risks. In your report, is there evidence of creating a plan? A practical tip is to great a Gantt chart, but break it down into a fair amount of detail. This said, don’t make it too detailed, as otherwise you’ll spend too much time updating your plan and not doing any project work! A further practical tip is: do begin a project log, and put this as an appendix. This will help you when it comes to the learning outcomes that are all about reflection.
LO10: Ethics, equality and diversity
A more detailed heading for this outcome is: identify and address the legal, social, ethical and professional issues (LSEPIs) and the equality, diversity and inclusion (EDI) concerns. Since computing systems can have real impact within society, and to individuals, it is important to consider what these are. There should be a section within your report that addresses this, and concerns about ethics should inform what you do, and how you approach the different stakeholders.
LO11: Analyse a practical problem and devise and implement a solution
The full learning outcome is: Analyse a practical problem and devise and implement a solution, which should be within the area of your chosen specialist route, if applicable, building on, and extending, the knowledge and skills developed throughout your earlier OU studies and experience. Put another way, you should demonstrate what you already know, what you have learnt, along with what skills you have gained from earlier study, and what skills you have developed during the period of the project. You should do all this through your project report.
Summary
TM470 is very different to OU modules that teach a particular topic, since so much of the decision making about what you do, and what you write about is up to you. The module begins to make sense if you think in terms of producing ‘something’ (a project report) that demonstrates your skills and abilities. I often tell students that TM470 is all about showing off your skills and abilities, i.e. showing off to the examiners what you have learnt, and what you can do. The module learning outcomes help you to understand what you need to focus on to show off in the best possible way.
Acknowledgements
Many thanks to the TM470 module team, and the follow tutors that I work with.
TM470 Learning Outcomes
TM470 is the Open University’s Computing and IT project module. It is what is called a capstone module, which is studied towards the end of the Q62 Computing and IT BSc qualification. It is an important element, since it is linked to the degree being recognised by the British Computer Society (BCS)
If you study this this module, you are required to carry out a substantial project which demonstrates your learning that has taken place on earlier modules. It is also used to develop your project management skills. Given the final output from the module is a project report TM470 also helps to develop your writing skills.
Like many other modules, TM470 is assessed through a series of learning outcomes. To pass the module, you must demonstrate that you have met these outcomes. This means that you need to provide sufficient evidence in your project report to ensure that the examiner can see that you meet all the criteria that are embodied within those outcomes.
A fellow tutor has described TM470 as a bit like a very long assignment (or end of module assessment). Every tutor marked assessment (TMA) is designed to help you to move towards the writing of your end of module assessment. As you study the module, it is recommended that you review the learning outcomes of each TMAs. Different TMAs will be assessing different learning outcomes. In turn, this will take you to the EMA, and its learning outcomes.
What follows is a brief summary (and my own interpretation) of the learning outcomes that relate to the module EMA, which is the same thing as the project report. A full summary of the learning outcomes and the accompanying assessment criteria is, of course, available through the module website.
Before looking at all the outcomes, I should note that these are my own notes, and my own opinions, rather than that of the module team. Always refer to the module team materials for official guidance.
Interpreting the TM470 Learning outcomes
LO1: Demonstrate your understanding of technical concepts relevant to your project
I have paraphrased this learning outcome from the original version: demonstrate and apply a systematic understanding of the fundamental technical concepts and principles relevant to your project. In other words: you need to do stuff to show what you have learnt from your earlier studies. There is an implicit link between this learning outcome, and learning outcome 11.
LO2: Identify and refine the goals and content of your project
This is all about the aims of your project. Does it solve a specific and easily defined problem that can be described in a few concise sentences? A quick check is: does it make sense if you explain your project idea to someone who doesn’t know what you have been studying? Does it solve a real need? Do refer to the module guidance about what constitutes a good project aim and idea.
LO3: Skills, resources and activities
The full outcome is: identify, list and justify the resources, skills and activities needed to carry out the project successfully. Another part of this outcome is: identify and address any associated risks. If there evidence of each of these elements? Do you consider what resources you need, such as software, or people? Also, how about risks? Is there evidence of how you have considered risks? Are these risks sensible?
LO4: Gather, analyse and evaluate relevant information
In my eyes, this theme cross cuts a couple of sections. Is there evidence of your reading in your report, by way of a literature review section? Also, when it comes to make decisions about what to do with a potential design, have you documented what you think is important. In other words, is there enough information that enables the reader of your project report to understand the story of what was done within your project?
LO5: Critically review how you have tackled the project
This outcome is one of the two outcomes that is all about reflection. If you don’t get everything working as you had hoped, or things didn’t go to plan, don’t worry. Instead, do tell the examiner about it. Importantly, tell them why you thought it didn’t go well, and what you have learnt from it. Also, do assess whether you felt your original plans were appropriate. During the planning of your project, thinking about risks is important. Did you go overboard on your risk planning?
LO6: Make effective use of a variety of information sources
This outcome is linked to LO4, but it is more about your reading, and how what you have read has informed what you have done. You also need to demonstrate that you have drawn on sources that have academic credibility. Whilst blog posts (such as this one) can be useful, they don’t hold as much weight as books or formal articles. An element of the project report is to demonstrate not only your practical skills, but also your academic skills. In turn, you need to make sure you reference everything clearly.
LO7: Communicate clearly
The full title of this outcome is: communicate information, ideas, problems and solutions clearly. In other words, you must demonstrate that you’re able to write a well written report that describes what you’ve done. A really useful bit of advice I was once offered was: “make sure what you write is as interesting as it can be”. Academic writing, whilst formal, doesn’t have to be boring. Put a bit of yourself into your writing, especially when it comes to the reflection section.
LO8: Learn independently and reflect on what has been done
This outcome is all about reflection. When looking back across your project, it is okay to get a bit more personal. This outcome is all about saying what you felt went well and what went badly, what you have learnt, and whether there were any surprises. Also, do you now know something new about yourself and how you work, than you did before?
LO9: Plan and organise your project work
The full outcome is: plan and organise your project work appropriately, and keep systematic records of plans, progress and outcomes. This outcome is linked to learning outcome 3, which is about resources, activities and risks. In your report, is there evidence of creating a plan? A practical tip is to great a Gantt chart, but break it down into a fair amount of detail. This said, don’t make it too detailed, as otherwise you’ll spend too much time updating your plan and not doing any project work! A further practical tip is: do begin a project log, and put this as an appendix. This will help you when it comes to the learning outcomes that are all about reflection.
LO10: Ethics, equality and diversity
A more detailed heading for this outcome is: identify and address the legal, social, ethical and professional issues (LSEPIs) and the equality, diversity and inclusion (EDI) concerns. Since computing systems can have real impact within society, and to individuals, it is important to consider what these are. There should be a section within your report that addresses this, and concerns about ethics should inform what you do, and how you approach the different stakeholders.
LO11: Analyse a practical problem and devise and implement a solution
The full learning outcome is: Analyse a practical problem and devise and implement a solution, which should be within the area of your chosen specialist route, if applicable, building on, and extending, the knowledge and skills developed throughout your earlier OU studies and experience. Put another way, you should demonstrate what you already know, what you have learnt, along with what skills you have gained from earlier study, and what skills you have developed during the period of the project. You should do all this through your project report.
Summary
TM470 is very different to OU modules that teach a particular topic, since so much of the decision making about what you do, and what you write about is up to you. The module begins to make sense if you think in terms of producing ‘something’ (a project report) that demonstrates your skills and abilities. I often tell students that TM470 is all about showing off your skills and abilities, i.e. showing off to the examiners what you have learnt, and what you can do. The module learning outcomes help you to understand what you need to focus on to show off in the best possible way.
Acknowledgements
Many thanks to the TM470 module team, and the follow tutors that I work with.