OU blog

Personal Blogs

Christopher Douce

Degree apprenticeship: DTS Themes

Visible to anyone in the world
Edited by Christopher Douce, Tuesday, 5 Mar 2024, 08:44

The Open University offers a Computing undergraduate degree apprenticeship for England and Wales. The English degree apprenticeship is known as the Digital and Technology Solutions Professional Degree Apprenticeship.

The current version of the standard, which is defined by the institute for apprenticeships is version 1.2 (Institute for apprenticeships)

Apprentices need to pass two elements: their degree bit (the academic element), and the apprenticeship (the work based learning element). Both of these elements are broken down into smaller parts. The academic bit is broken down into academic modules. The apprenticeship is defined in terms of knowledge, skills and behaviour (KSB) attributes which are, in turn, grouped together into sets of themes. To gain their apprenticeship apprentices must provide evidence of being able to satisfy all the KSBs which make up the themes. 

Passing the apprenticeship bit is a two-step process. Apprentices must demonstrate competency across these themes before entering what is called a ‘gateway’ process, which takes them to something that is called an endpoint assessment (EPA). The EPA is a professional conversation where the apprentice speaks with an assessor.

What follows is a summary of the themes for both parts of one apprenticeship pathway: the software engineering professional pathway. Some themes can only attract what could be called a pass grade, whereas others can attract a distinction grade. For concision, only the criteria that relates to the pass are highlighted here. A further note is that the themes are split into two bits: a core set of themes, and themes that relate to a specific pathway. For detailed information, do refer to the DTS standard.

A further note is that all the themes highlighted here, and can be found within the standard, are also mentioned within the apprenticeship ePortfolio tool (which is known as MKM). Where there is a heading, there will also be a space to record evidence.

Towards the end of this summary, there is some guidance about the recording of evidence. This is important; without evidence it is not possible to pass through the gateway process, or to complete the final end point assessment.

DTS apprenticeship themes

Core themes

The Organisational Context

Reviews the roles, functions and activities relevant to technology solutions within an organisation. (K7)

Core Technical Concepts

Critically evaluates the nature and scope of common vulnerabilities in digital and technology solutions (K11)

Explains core technical concepts for digital and technology solutions, including:

  • The approaches and techniques used throughout the digital and technology solution lifecycle and their applicability to an organisation’s standards and pre-existing tools. (K6)
  • Data gathering, data management, and data analysis. (K12/K14)
  • Computer networking concepts. (K16)

Applied Technical Solutions

Demonstrates the use of core technical concepts for digital and technology solutions, including:

  • Initiate, design, code, test and debug a software component for a digital and technology solution. (S4)
  • Security and resilience techniques. (S9)
  • Initiates, designs, implements and debugs a data product for a digital and technology solution. (S10)
  • Plans, designs and manages simple computer networks. (S12)
  • Applies the principles of data analysis for digital and technology solutions. (K13/S11)

Leading and Working Together

Explains how teams work effectively to produce a digital and technology solution applying relevant organisational theories using up to date awareness of trends and innovations. (K8/S7/B4/B6/B7)

Describes the concepts and principles of leadership and management as they relate to their role and how they apply them. (K9/K10/S8)

Social Infrastructure - Legal, Ethical and Sustainability

Applies relevant legal, ethical, social and professional standards to digital and technology solutions considering both technical and non-technical audiences and in line with organisational guidelines. (K19/S15/B1/B2/B5)

Explains sustainable development approaches within digital technologies as they relate to their role including diversity and inclusion. (K20/B8)

Software Engineer themes

Underlying Principles

Describes scenarios covering all stages of a development lifecycle, identifying techniques and methods are applied in each case. (K21/SEK1)

Explains the principles of a range of development techniques, for each stage of the software development cycle that produce artefacts and the contexts in which they can be applied. (K22/SEK2)

Explains the principles of a range of development methods and approaches and the contexts in which they can be applied. (K23/SEK3)

Technical Solutions

Describes. how to interpret and implement a design, compliant with functional, non-functional and security requirements. (K24/SEK4)

Describes how tools that support teamwork can be used effectively. (K28/SEK8)

Innovation and Response

Describes how they respond to changing priorities and problems arising within software engineering projects by making revised recommendations, and adapting plans as necessary, to fit the scenario being investigated. (S20/SES5)

Explains how they determine, refine, adapt and use appropriate software engineering methods, approaches and techniques to evaluate software engineering project outcomes. (S21/SES6)

Legal, Ethics and Landscape

Describes how they extend and update software development knowledge with evidence from professional and academic sources by undertaking appropriate research to inform best practice and lead improvements in the organisation. (S23/SES8)

Preparing for the End Point Assessment

Towards the end of the apprenticeships, apprentices need to complete a significant work-based project. As well as writing a 6k word report, there must be evidence collected that relates to the following themes.

Core themes

The Organisational Context

Identifies the role digital technology solutions play in gaining a competitive advantage by adapting and exploiting them (K1)

Explains the principles of strategic decision making concerning the acquisition or development of digital and technology solutions. (K2)

Project Requirements

Analyses relevant evidence to produce a proposal for a digital and technology based project in line with legal, ethical and regulatory requirements whilst ensuring the protection of personal data, safety and security (S3/B3)

Project Planning and Resources

Produces a project plan which estimates risks and opportunities and determines mitigation strategies. (K3/S2)

Evaluates appropriate techniques and approaches that are used in creating a business case (K4)

The project applies techniques to estimate cost and time resource constraints. (K15)

Researches information on innovative technologies/approaches and investigates and evaluates them in the development of a digital and technology solution. (S14)

Solution Proposal

Analyses the business problem behind the project proposal to identify the role of digital and technology solutions. (S1)

Project Delivery

Carries out the identified solution proposal utilising a range of digital tools and standard approaches. (K5/S5)

Manages the project delivery to achieve digital and technology solutions. (S6)

Project Evaluation

Justifies their methods of research and evaluation which determined the selection of digital and technology solutions identified for the project. (K18)

Presents an overview of the project to appropriate stakeholders using appropriate language and style. (K17/S13/B5)    

Software Engineer themes

Technical Solutions

Analyses the factors affecting product quality and the approaches controlling them throughout the project development process. (K25/SEK5).

Selects and applies software tools appropriate to the Software Engineering project solution. (K26/SEK6)

Outlines approaches to the interpretation and use of artefacts. (K27/SEK7)

Innovation and Response

Identifies and defines a non-routine, unspecified software engineering problem. (S16/SES1)  

Recommends a software engineering solution that is appropriate for the project brief. (S17/SES2)

Selects and applies analysis methods, approaches and techniques in software engineering projects to deliver an outcome that meets requirements. (S18/SES3)

Demonstrates how they implement software engineering projects using appropriate software engineering methods, approaches and techniques. (S19/SES4)

Evaluates their selection of approach, methodology, analysis and outcomes to identify both lessons learned and recommendations for improvements to future projects software engineering projects. (S22/SES7)

Evidence for the themes

Evidence for all these themes must be uploaded to the apprenticeship ePortfolio. There is two types of evidence: witness statements, or evidence through the academic study. For the apprenticeship element, witness statements are considered to be a stronger form of evidence than completing tutor marked assessments. 

Witness statements can be prepared by a line manager, or a delegated mentor of colleague. They present a narrative summary of what an apprentice has done or achieved and should be anything between 100 and 150 words. These statements should be uploaded to the apprentice’s ePortfolio tool by the apprentice.

Acknowledgments

The key reference for this post is, of course, the DTS standard. The text for some of these headings have been drawn from the MKM ePortfolio.

Permalink Add your comment
Share post
Christopher Douce

Digital Technology Solutions Professional 1.2 briefing (England)

Visible to anyone in the world

In addition to being a staff tutor, I am also a degree apprenticeship practice tutor for the OU DTS scheme, which is an abbreviation for Digital Technology Solutions. This is a standard which has a number of pathways, which takes apprentices 56 months to complete.

On 17 July 23, went to a briefing which aimed to summarise updates to the DTS programme, which has now moved to version 1.2. What follows is a summary of that briefing. An important point to note that is that all these notes only applies to England, since Scotland and Wales have their own schemes (there is no equivalent scheme in Northern Ireland).

What follows is information about the new DTS apprenticeship standard, followed by a summary of changes and a recap of the OU modules that contribute to the DTS scheme. More details are then provided about the end point assessment which ties everything together.

Where possible, to make this blog as useful as possible, I have also provided links to module descriptions. Within the OU apprenticeship scheme, module codes that contain the letters XY are used to identify which modules contribute to a degree apprenticeship programme. For practical and study purposes, there are no differences between apprenticeship and non-apprenticeship modules, other than apprenticeship modules being supported by both a practice tutor and an associate lecturer (who is an academic tutor).

It should be noted that this blog only relates to a programme that is run from the School of Computing and Communications, and is not relevant to other apprenticeship schemes run by other schools. 

The apprenticeship standard

The DTS apprenticeships are defined in terms of the duties that apprentices carry out in their workplace role, and the Knowledge, Skills, and Behaviours (KSBs) that they require to fulfil those duties. The OU provides teaching to apprentices to enable them to gain the necessary KSBs needed to fulfil the DTS standard. 

During the course of the apprenticeship each apprentice is expected to demonstrate during their normal work that they are competent in each of the KSBs. This will be recorded in an ePortfolio system, known as My Knowledge Map, and assessed through an End Point Assessment (EPA).

Apprentices, practice tutors, and employer representatives working with apprentices should be familiar with the current apprenticeship standard. One of the roles of the practice tutor is to signpost these standards to these stakeholders.

Another key role of the PT is to make sure that the apprentice and the employer (and other people who may well be supporting an apprentice) are aware of the KSBs, the learning outcomes of the different modules. They are also to facilitate the discussion of opportunities to make sure the apprentices gains sufficient learning experiences to enable them to fulfil the requirements of the KSBs. In some cases, the employer will be responsible for providing the apprentice with additional training and mentoring in the specific KSBs that apply in their workplace.

The PTs will be responsible running regular review meeting, working with employers to make sure that the apprentice has sufficient work-based opportunities to enable them to demonstrate their KSBs, and ensure that their ePorfolio is regularly updated. Regarding the ePortfolio, there are two important elements that need to be remembered: the recording of off-the-job time (to demonstrate engagement with the academic content), and the saving of assessments and materials which relate to the KSBs. The practice tutor also has a responsibility for ‘marking’ that materials have been submitted.

Main changes

The following points highlight the key changes:

  • All the KSBs have changed from the previous version of the standard. The new KSBs, however, cover the same ground.
  • Cyber specialism improved, with a module change (TMXY352 Web, mobile and cloud technologies, replaced by TMXY256 Cyber Security)
  • EPA project report is shorter, but the ePortfolio is now assessed.
  • Employers will need to ensure apprentices have the right opportunity to demonstrate KSBs in the workplace.
  • EPA date and results moved a month later to allow for modules results.
  • Rewording and enhancing of KSBs in the standard, but delivery is very similar (improved content on mobile communications added to networking specialism, new module for cyber)

Compulsory modules

What follows is a list of all the compulsory modules that an apprentice will work through, summarised in terms of the aim of each module:

During TMXY476 the apprentice should work on a substantial project (during their on the job time) which makes a positive impact on the operation of the business. This project should be substantial enough to allow the apprentice to illustrate their competency in the KSBs assessed within the project.

The programme has three modules that are intended to relate to work-based learning that takes place: TXY122, TXY227 and TMXY350, which are studied in parallel with the other modules. For TXY122 apprentices need to prepare a CPD plan which should be related to their pathway. Working with their employer and practice tutor, apprentices should aim to secure work experience that adds depth and relevance to the academic modules.

Apprenticeship pathways

The DTS scheme has four pathways. Apprentices study the following modules, depending on the pathway:

Practice tutors need to have some knowledge of all these pathways. If further information is needed, practice tutors can gain support from other colleagues who know more about specific areas.

End Point Assessment (EPA) requirements

The End Point Assessment (EPA) has become a more formal requirement. Apprentices are expected to demonstrate competence through applying the KSBs in the workplace, where their manager or a mentor confirms they are working at the expected level. Evidence is collated and stored in their portfolio. The practice tutor will help apprentices to prepare, collate and submit their best evidence through the MKM ePortfolio.

To complete the EPA, apprentices must:

  • Submit a record of six workplace experiences related to the apprenticeship to demonstrate what has been achieved. These can be examples from TMAs produced from the work-based learning modules.
  • Complete a 6000 word project report and deliver a 20 minute presentation. This is accompanied by a 40 minute question and answers session, and 60 minute professional discussion supported by the portfolio. The grading criteria for the project module will be tightly aligned to the apprenticeship grading criteria.
  • Provide a portfolio of completed assignments for all modules that have been studied, which have been approved as ‘marked’ by the practice tutor.
  • To have a clear record of off-the-job time, which is the equivalent of one day a week dedicated to study that complements the work-based element of the apprenticeship.

My knowledge map: the ePorfolio

All new apprentices will be enrolled to the MKM ePorfolio. PTs should take both the employers and the apprentices through MKM and emphasise its use. 

MKM will contain the following information:

  • Background information and documentation, such as the chosen pathway and the apprentice's skills scan document, which is a knowledge assessment of skills possessed by an apprentice at the start of the programme.
  • Details of four progress reviews that are scheduled throughout the year. A practical suggestion for practice tutors is to set them all up at the start of the year with an expectation that they might be change if necessary. One of these meetings will be face-to-face; the rest are virtual.
  • Records: of off-the job study time, which is to be recorded by the apprentice. Records of successfully completing the assignments for the academic elements.

New PTs are able to view screen share recordings to become familiar with the tool, and how it works. All PTs should have access to the tool when they are assigned a group of apprentice students.

Acknowledgements

Acknowledgements are given to Chris Thomson who prepared and delivered this briefing. Much of this summary has been drawn from the PowerPoint resource that he prepared, and many of his words have been edited into a form that is more easily presented through this blog. Any errors or misunderstandings are likely to be mine, rather than Chris’s.

Permalink
Share post
Christopher Douce

Digital Technologies Solutions Professional (DTSP) PT Training

Visible to anyone in the world
Edited by Christopher Douce, Wednesday, 27 July 2022, 11:21

In my capacity as a degree apprentice practice tutor, I’m invited to a regular professional development and update meeting which currently takes place on the second Friday of each month. At the time of writing, these meetings are hosted by two colleagues: Chris Thompson and Andy Hollyhead.

This blog post shares a set of notes that were made during a PT training meeting that took place on 8 July 22. The key points on the agenda were, broadly:

  • The OU Quality Improvement Plan (QIP) and our response
  • F2F meeting update
  • Good academic conduct for apprentices

ePortfolio update

The university is introducing a new ePortfolio tool, moving from the current system, which is called OneFile, to a different product. Accounts are currently being created, and training will be provided in September 22 with a view to using it from the beginning of October, when new groups are created. Files and records, such as timesheets will (I understand) be moving between the systems.

Quality improvement plan

A quality improvement plan has been put together by the university following the production of an OU annual self-assessment report (which is an internal evaluation about the quality of the degree apprenticeship provision).

Some key points that are to be looked at as a part of the plan include:

  • Targeted CPD throughout the year, which includes the further development of a supportive observation process to help develop practice, to ensure all PTs and ALs are provided with development opportunities to enable others to become outstanding. Practice tutor meetings are being observed.
  • An intention to link observational practice and improvement to the tutor CDSA process to ensure all apprentices are identified (or presented) in terms of having a RAG status (red, amber, and green), and have individual action plans.
  • Increasing the frequency of contact for learners who are red or amber: If an apprentice is flagged as being amber or red, there’s an additional meeting (which can be claimed back as an additional support session) and there is an action plan that is to be completed, and another follow up meeting in a month’s time.
  • Review all apprentice progress monthly, including a review of individual plans where apprentice progress is rated red or amber.
  • Ensure practice tutors use ‘starting points’ to inform learning plans: the next intake, aim to get a skills audit and commitment statement early, so students can speak about them during the early meeting, to gain a detailed understanding of the needs of students.
  • Practice tutors will begin to discuss ‘next steps’ with apprentices, to understand what their intentions beyond their apprenticeship. I have noted down the point: start picking up at each progress review, to facilitate a career related discussion.
  • Upskill practice tutors to ensure that knowledge, skills and behaviours are reviewed throughout all stages
  • Ensure attendance of apprenticeship mentor (line manager/supervisor) at all Tripartite Review meetings: someone who represents the organisation, needs to be at the meeting. If this doesn’t happen, there should be referrals to the university apprenticeship programme delivery managers (ADPMs).
  • Improve the recording of off the job training: apprentices are told to record their timesheets. This is known to be a contractual obligation. The employer line manager and apprentice has to know that timesheets need to be recorded. If they are no doing this, this needs to be escalated, through the APDMs. If no responses, then the processes for removal from the programme may be instigated. There needs to be an entry every 4 weeks, to show that the apprentice is in learning.
  • Ensure all apprentices receive the minimum number of reviews regularly: every apprentice must have 4 reviews. The only exception is if they have a break in learning.
  • Enhance supportive measure to keep apprentices in learning: develop better monitoring of apprentices, between modules.

A return to face-to-face review meetings

From 1 August 2022, practice tutors are allowed to return to face to face reviews. There should be one face to face every year, and a maximum gap of 15 weeks between each review, and evidence of the planning of the next review (which should be captured on the ePortfolio).

Apprentices returning following a study break

A study break is, simply put, a period of time when an apprentice is not studying their academic of work-based modules. A break in learning might occur due to personal commitments. Apprentices should have the review within 4 weeks of returning to study. Also, a conversation is needed early on during the apprentice’s study of a programme to ensure they are on the right programme.

For the formal part of the meeting, the apprentice, line manager, and the practice tutor must be present. If it is a face-to-face meeting, and there isn’t a line manager, try to find a delegate. It is a funding requirement that these meetings take place. They should, ideally be scheduled two weeks in advance.

If there are students returning from a break in learning, get in contact with them two months before their restart, to make sure they feel they are ready to start learning. Also, ensure they are recording on the job timesheets to provide evidence of study.

Lone working guidance

The university has now prepared some new guidance about lone working, which is appropriate for when practice tutors visit an employer. There’s a checklist, and an accompanying risk assessment, for visiting locations. Practice tutors must review this official guidance when planning a first progress review meeting.

Good academic conduct for apprentices

Good academic conduct is important. In the apprenticeship context, a group of apprentices might start working at an organisation at the same time. Whilst it is certainly okay that peers gain support from each other, and collaborate closely on work tasks, peers should not collaborate with each other when it comes to working on and submitting academic assessments (unless group work is specifically required on an assessment task).

During this session Andy Hollyhead shared a number of slides from a fellow Practice Tutor, Stewart Long. The presentation (which could be shared with apprentices) covers the topic of plagiarism and the difference between collaboration and collusion.

Further information about study skills is available through an earlier blog post and also from the OU Study Skills website, which provides links to some really useful booklets.

Reflections

One of the good things about this session is that it offered reassurance about the things that I am doing well and also offered some helpful guidance about what I should be doing, and ought to be doing more of. 

A particularly interesting point is the link between the apprentice, the employer, and their wider career aspirations. I’m very much a subject specialist, rather than a careers specialist, but I’m certainly draw on my own knowledge of roles and opportunities with the IT and Computing sector and bring them into discussions with apprentices. This said, I do feel that this is an area that I need to develop, or get a bit more knowledgeable about.

I was particularly encouraged that I was doing the right things, in terms of planning for review meetings with employers and apprentices. One thing I do need to do is expose more of the actions that I am taking. Just as the apprentice must record off the job training, in the form of timesheets, I also need to make sure that the scheduled review dates are recorded within the ePortfolio, to ensure that colleagues within the apprenticeship team can see what is scheduled. I have all the dates in my Outlook calendar. I need to transfer them to OneFile (and, eventually, the new ePorfolio system, when it is introduced).

More information about the OU degree apprenticeships are available through the OU Apprenticeship pages.

Permalink 1 comment (latest comment by Jonathan Vernon, Saturday, 30 July 2022, 06:11)
Share post
Christopher Douce

Degree apprenticeship: cross-faculty CPD event for Practice Tutors, 10 June 22

Visible to anyone in the world

On 10 June 22, I attended a continuing professional development event for degree apprenticeship practice tutors. I’m a practice tutor for the OU’s Digital and Technology Solutions degree apprenticeship scheme. The university also runs schemes that relate to business, nursing and policing.

This blog post is a short summary of some of the themes that were discussed and explored within this event. It is primarily intended as a record of my own CPD, and I’m sharing it more widely just in case it might be of interest to other delegates, and colleagues who are responsible for the CPD of the degree apprenticeship programme.

The aim of the event was the develop the quality of practice tuition and to share best practice. The event began with an overview, and some definitions. I was surprised to learn that there were 400 PTs (or PT contracts) being managed across the university. Regarding the definitions, a PT was a practice tutor, who is someone who works with apprentices and employers. An AL is an associate lecturer, or a module tutor. 

Quality assurance of practice tuition

The aim of this first session, presented by Anna Colantoni and Barb Cochee was to help practice tutors gain an understanding of the aims of the quality assurance project, and its project deliverables, also providing an opportunity for discussion. 

I noted down that the quality assurance project contained 6 project deliverables which were managed in 2 strands. The first strand was about technology and data strand, which included eportfolio implementation, data infrastructure, and technology infrastructure. The teaching support and quality improvement strand included deliverables relating to practice tuition, governance, apprentice and employer guidance and support.

We were presented with some definitions through a question: what is quality assurance, and what does it involve?

  • “quality assurance is the act or process of confirming the quality standards are being met”.
  • “A programme for the systematic monitoring and evaluation of the various aspects of a project, services, or facility to ensure that standards of quality are being met”.

Examples of activities that relate to quality assurance include the monitoring of marking, gathering of feedback from apprentices or employers, mentoring from staff, and carrying out observations of practice tutor meetings and tutorials.

I noted that there was a difference between quality assurance and quality enhancement. Enhancement means: “improvement of quality brought about through cycles of continuous improvement and innovation”, with the point that there isn’t a final end point, and culture can play a role.

During this session, I also made note of some project outputs. These included the practice tutor quality framework and accompanying papers. These papers relate to tripartite meeting standards (meetings between a practice tutor, apprentice, and the apprentice’s line manager), the tripartite meeting observation process, and a PT professional development framework. Further development activities includes a review of the apprenticeship hub review; a dedicated VLE site, which is used to share information.

Progress review meetings –what should good look like?

The aim of this second session, facilitated by Jo Bartlett, Vicki Caldwell and Lucy Caton (Academic Leads, Practice Tuition, Apprenticeships Change Programme) was to share updates about good practice guidance, share details of the observation of progress review meetings, and to share ideas about good practice and challenges of progress review meetings.

This session explored the tripartite progress review meetings, which take place between an apprentice, an employer and a practice tutor. The meetings were described as “complex, cross boundary working”.

I noted down the following from a summary: the role of the practice tutor is to oversee the work based-learning that takes place; sometimes this can relate to programme requirements, or regulatory requirements. Key tasks can include setting of learning plans, setting of objectives, applying academic learning to academic setting, encouragement of reflecting, opportunities to shadow others. Also, the meetings help the practice tutor understand the work setting and help the apprentice and the employer understand their study and learning programme.

I also noted that it is important that our student (apprentice) feels well supported, and engage in a wide range of activities. In the apprenticeship, the employer has a role of providing opportunities to help learner apply and develop the academic learning.

During this session we were put into different breakout rooms. There was a room about “encouraging reflection”, a room about “addressing barriers to learning”, and two more about “ensuring relevant learning opportunities” and “setting SMART objectives”. We were given a direction: share good practice and something that you may have done to overcome some challenges.

I was put into the “encouraging reflection group”, and found myself amongst a group of PTs who work with nursing and police apprentices. 

A key point was: students need to be encouraged, to understand and develop a reflective mindset. A couple of frameworks were shared and mentioned, such as the “what, so what, now what?” by Rolfe et al. Other models were mentioned, such as those by Gibbs and Kolb. We were directed to the University of Edinburgh reflective toolkit and some OpenLearn resources were mentioned, such as Learning to teach: becoming a reflective practitioner which highlight different reflective models.

Back in the plenary room, we gathered feedback from the different rooms. I’ve managed to summarise feedback from two of the groups.

Barriers to learning opportunities: this group discussed the importance of the learning environment, organisational culture, organisational understanding, and requirements. Other points included he importance of the line management engagement, and ensuring off-the-job time. A PT has the opportunity to emphasise the benefits of the degree apprenticeship to the organisation in terms of student progress and development.

Setting SMART objectives: get the employer to create 3 objectives, which are then used within the discussions that are used within the meeting discussions. Consider how they may be linked to the educational objectives.

Reflections upon supporting learners to apply theory into practice 

Following on from our breakout room discussions about reflections, the next session was facilitated by Sarah Bloomfield (Lecturer in Work based Learning, FBL), Evelyn Mooney (Lecturer, Adult Nursing, WELS) and Anthony Johnston (Staff Tutor, STEM). Rather than focussing only on reflections, this session also emphasised work-based learning, and the role that it plays in a degree apprenticeship.

We were presented a question: what is work based learning? It could be considered to be learning for work, learning at work, or learning through work. A comment was that these definitions relate to a framework that is used within the degree apprenticeship standard, which is about the development of knowledge, skills and behaviours.

Next up was a presentation of an adaptation of Kolb’s reflective cycle, which featured experiencing issues in practice, taking action and trying something new, using theories and concepts to think differently, and reflecting on practice (or, what has been done). Theories can be thought of as tools, or a lens, which can be used to how to look at problems or how things are done.

Another question was: wow can PTs help with the work-based learning? There are, of course the quarterly reviews (which can be tripartite meetings), but also practice tutors can facilitate progress reviews.

In my own work as a practice tutor, I make extensive use of a review form. It was mentioned that on these forms, it would be useful to emphasise which new knowledge, skills and behaviours have been gained. Also consider asking: has there been anything that is new and interesting?

Just like the previous session, we were put into breakout rooms. We were asked two questions: (1) What strategies do you use to help learners apply theory/knowledge into their practice? (2) What challenges do you face in doing so?

During our room, we held the view that it might be useful for practice tutors to have a discussion with a module tutor to understand not only where the student is, but also to get a more detailed appreciation of the module materials.

During the plenary session, the use of forms or prompts to help to draw out conversations were discussed. A useful question could be, “tell me something that you have read that has informed your practice”. Also, asking open questions is important, such as, “tell us about what you are doing at the moment?” Pinpoint something that is helpful for them to focus on. 

Effectively supporting learners with additional needs

This session, facilitated by Michelle Adams (Senior Manager, Disability Support Team) and Claire Cooper (Manager, Disability Support Team) was less interactive, and was more about the providing of information to practice tutors about the support the university provides to students with disabilities.

A student may disclose a disability at any point. If a student discloses a disability to a tutor or a practice tutor they are, in effect, disclosing a disability to the university. When this happens, the disability support team creates a student profile through the use of a disability support form. If appropriate, students are encouraged to apply for the disabled students allowance, and can apply to the access to work scheme.

Disabled student allowances is externally funded by the government, and there are four types of award: specialist equipment, non-medical helper support, general allowance, travel allowance. The university also provides an auxiliary aids team and a small equipment loan scheme to bridge the gap between applying for support, and receiving support. The university provides different interim loan kits. The exact composition of the scheme differs according to the needs of students.

The New AL Contract: your questions answered

I split my time between the last two sessions. I began with the session about the new AL Contract, which was facilitated by Dan Sloan (Senior Manager, AL Services/AL Change Programme) and Sam Murphy (Implementation Programme Lead), and then moved to the other session about peer support.

This session began with some definitions that tutors and practice tutors might see on their contract details. Some key terms and topics were about FTE, and the differences between contracted FTE, delivery FTE, and allocated TRA days.

If you are reading this blog as someone who is internal to the university, you will be able to find a set of resources and posts that relate to the new AL contract. A notable post is one that summarises how your FTE if calculated.

Developing opportunities for peer support

This final session was facilitated by Barbara Cochee (Senior Manager, PT Training and Development, ALSPD) and Olivia Rowland (Content Designer, ALSPD). To facilitate the discussions, we were asked who our peer were, what does peer support look like, what might benefits of peer support might bring, and what support might you need to make this happen?

This session featured quite a wide ranging discussion. We discussed the importance of face-to-face meetings, and the role of module tutors.  It was acknowledged that, for some programmes, there can sometimes be a distance between the academic tutors and the academic assessors. For some apprentices (such as those within nursing programmes), students need to pass the academic studies as well as their practice studies (or, practical skills that they need to master).

A thought that I did have is that, in some ways, practice tutors represent a bit of administrative and academic glue in a degree apprenticeship programme. They exist as glue between academic modules and tutors, glue between employer and programme, glue between the apprentice and the work-based learning, glue between academic and work-based learning, and offer pointers to additional resources, and connecting together different aspects of support together. 

In terms of the practice tutor community that I’m a member of, perhaps the best form of peer support comes from a school perspective, and linked to a particular degree apprenticeship programme that I’m helping to support. I don’t know very many other practice tutors. It would be great to know a few more, if only to more directly understand that I’m offering the right kind of support.

Reflections

I think this was the first event of its type that I’ve been to. It was a large event; there were around 100 delegates. I was a little grumpy about the earlier sessions about quality assurance. I have the view that quality emerges from the relationships that exists between people – specifically, colleagues, tutors, and students.

Hearing about the perspectives from other faculties was helpful, especially in terms of hearing different views about the role of the practice tutor, and what they contribute during the tripartite meetings. Overall, I found the discussions the most helpful, and I would welcome the opportunity to participate in more of these events.

One thing that I would like to hear more about is more stories: stories from the employers, stories from tutors and, most importantly, stories from apprentices.

Permalink Add your comment
Share post
Christopher Douce

English DTS degree apprenticeship: work-based learning modules

Visible to anyone in the world
Edited by Christopher Douce, Saturday, 2 Oct 2021, 13:12

The OU is also a provider of English, Scottish and Welsh degree apprenticeships.

This blog provides a summary of some of the important work-based learning modules that Computing and IT students study as a part of their English degree apprenticeship programme. It has been prepared a simple ‘summary article’ that I can share with English degree apprentice students and their employers.

More information about the OU degree apprenticeship schemes can be found on the OU Apprenticeships pages where further links to nation specific programmes can be found. Further information, that is specific the English scheme, the DTS programme for English degree apprenticeship students’ page offers a useful summary of the scheme.

This post was collated during the summer and autumn of 2021. Since modules, programmes and qualifications are always subject to enhancement and review, it is important to check the latest information that is available.

Acknowledgements are extended to the module chairs, module team members and curriculum managers who helped to prepare the following descriptions. I have taken the liberty of editing some of the words and headings to create a single article.

Work-based learning modules

Degree apprenticeship study takes approximately four years. Student study a combination of academic modules, and a set of work-based learning modules. Toward the end of the programme, students must complete a work-based project, which is also summarised towards the end of this article.

An important aspect of the degree apprenticeship programme is that students are encouraged to continually reflect on how their university study relates to and links with work-place activity. An import part of the work-based modules is to encourage and develop that reflection.

Here is a list of the work-based (and project) modules that are summarised in this post:

  • TXY122 Career development and employability
  • TXY227 Change, strategy and projects at work
  • TMXY350 Advanced work-based learning
  • TMXY475 Apprenticeship computing & IT project

During study of each of these modules, students will be allocated an academic tutor, who marks their assessments, and will be supported by a practice tutor.

TXY122 Career development and employability

One of the first modules that English degree apprentice students study goes by the module code TXY122. Students are also likely to study this module at the same time as a more academic module, TMXY130, which introduces some important topics, such as mathematics for Computing.

The aims and objectives of TXY122 are as follows: 

  • To enable students to develop their ability to learn from the workplace through reflective practice.
  • To enable students to apply their skills, understanding and knowledge within the workplace.
  • To develop students’ understanding of their organisational context and their role within it.
  • To equip students with the skills necessary to carry out research within their organisation.
  • To introduce the concept of professional standards and to enable students to map their existing skills and knowledge against relevant occupational standards.
  • To enable students to evaluate and develop their personal / professional / employability skills.
  • To give students an understanding of how to align their own personal and career development needs with the business objectives of their organisation.
  • To facilitate the production of a coherent learning and development plan.

Like many OU modules, the materials are divided into a number of blocks.

Block 1: Laying the foundations

Block 1 is called Laying the foundations and it is designed to help students to develop a sound understanding of what it means to learn in order to ensure that they get the most out of this module and, indeed, any other learning experience undertaken in the future. When we talk about learning we aren’t simply talking about traditional academic studies, because that is not what this module is about. 

Block 1 is focused on learning from experiences at work, the type of learning that will enable students to perform more effectively as they learn how to reflect on your experiences and acquire the knowledge and skills necessary to improve learning and performance on a continuing basis. 

The following themes are introduced:

  • laying the foundations for studying
  • thinking about how adults learn
  • learning in the workplace
  • managing your learning and development.

Block 2: Exploring the workplace

Block 2 contains two main sections. In the first section students will be introduced to elements of research design, including methods and sources used for gathering and analysing data and information, and students will learn how to distinguish between quantitative and qualitative data. In the second section the focus will shift to reporting the results of research in a clear and structured way and learning how to use various graphical devices to present data and information effectively.

The following themes are introduced:

  • research concepts, tools and techniques
  • reporting the results of your research
  • effective ways of presenting data and information.

Block 3: Personal, academic and career development planning

This block is designed to help students to take stock of their current position, decide where they want to go and plan how to get there. Students will look in detail at the principles and processes involved in personal and career development planning, and receive advice and guidance on how to reflect productively on their skills, knowledge and experience before being encouraged to think about their personal and career aspirations. Finally, they will be given practical advice and guidance on how to develop/update their personal and career development plans.

The following themes are introduced:

  • determination of role and skills set
  • benchmarking against occupational standards and frameworks
  • future goals and career development.

Block 4: Personal, academic and career development planning – the organisational context

Block 4 helps students to see where you fit within their organisational context. They will spend some time analysing where their organisation is heading and understanding how they can contribute to the success of their organisation while moving forward with some of their career development aspirations. Students will receive advice and guidance on action planning for personal, academic and professional development and look at how they can seek support from within their organisation for their continuing professional development proposals.

The following themes are introduced:

  • What is the business context and how do I fit within it?
  • What are the key trends and challenges facing the business?
  • What are my professional development needs?
  • Aligning business needs with career and academic development aspirations.
  • Planning for the future.

Assessments

The module is assessed through 3 Tutor Marked Assessments (TMAs) and an End of Module Assessment, which is the university’s equivalent of an end of module exam.

TXY227 Change, strategy and projects at work

Students will typically study TXY227 as their third second level (second year equivalent) module. 

The module will help students to:

  • gain an understanding of how social, technological, economic, environmental, political, legislative and ethical factors drive and enable change in the workplace.
  • develop knowledge, understanding, confidence and competence in project working and related employability skills
  • evaluate, develop and review personal, academic and professional skills
  • apply skills and knowledge to planning and presenting a project proposal that is capable of being implemented in their workplace.

During this module students are encouraged to integrate work and study by drawing on and investigating workplace resources, systems and experiences. There is therefore less ‘learning material’ than in a traditional OU module. Students are expected to do approximately 12 hours of study per week, in addition their apprenticeship role. Also, during the first 6 months of study, students are also likely to be studying two other degree apprenticeship modules.

Block 1: A changing world

This first block focusses on the topic of change. Key areas of study for this first block include, amongst others: understanding perspectives on change; different types of change; readiness to change; leading change and preparing for change. In terms of topics that relate to a work based context, themes include: knowing where you’re going; doing analyses; understanding internal external contexts; identifying the way forward and carrying out a Strengths, weaknesses, opportunities and threats (SWOT) analysis.

Block 2: Projects in your workplace

This second block explores the concept of a project. It begins by asking the question:  What is a project? Other themes (amongst others) include: time, cost and quality; changing a routine process; the project life cycle; your workplace learning, work-based projects; generating ideas for your work-based project; project stakeholders and meetings; project scope, constraints, risks and contingencies; managing risk and contingency planning.

Block 3: Project planning, organisation and completion

Block 3 continues the topic of work based projects by presenting the following themes (amongst others): project teams; team roles; resource planning; project budgets; project scheduling techniques such as networks and Gantt charts; project management roles, skills and attributes; project monitoring and reviewing, and project closure, evaluation and learning.

Block 4: Reviewing and presenting your work-based project proposal

Finally, block 4 is all about reviewing and presenting your project. Key topics include: reviewing your work-based project proposal, presenting your work-based project proposal, planning and preparing your presentation, practising and delivering your presentation, and evaluating your presentation.

Assessments

The module is assessed through 3 TMAs and an EMA

TMXY350 Advanced work-based learning

This module will build on students’ learning and experience from previous work-based learning modules, and prepare them for the proposed capstone project module (TMXY475), as well as for the Digital and Technology Solutions (DTS) apprenticeship End-Point Assessment (EPA). To complete the degree apprenticeship, students need to complete both. 

The module will help students with:

  • developing knowledge, skills and experience of workplace/work role investigation
  • knowledge, skills and behaviours mapping against relevant standards and frameworks
  • portfolio development
  • project planning and evaluation
  • report writing
  • interview and presentation tools and techniques
  • alignment of personal and career development needs with the business objectives of the organisation
  • production of coherent learning and development plans.

Block 1: Understanding learning outcomes and planning

In this short first block, which occupies five weeks, student will: carry out an initial mapping exercise against the relevant apprenticeship learning outcomes/core skills; extend their knowledge of project implementation, handover, closure and evaluation; explore some ideas for a final work-based project; and develop the initial version of a work-based learning plan (WLP) detailing resources, support and scheduling related to specified WLP objectives.

Block 2: Reviewing progress, requirements and project ideas

In this second block, which occupies eight weeks, students will: review progress against the WLP and produce an updated version; study the common causes of project failure and learn more about project review and evaluation; assess knowledge and understanding of apprenticeship requirements; further develop one idea for the final project.

Block 3: Updating your work-based learning plan and refining project ideas

In this third block, which also lasts eight weeks, students will: review progress against the WLP and produce an updated version; develop a feasible proposal for the final project; practise and evaluate skills in applying interview techniques and verbal communication skills. To help students, block resources will include: worksheets containing information, advice and guidance; provide resources for developing a final project proposal; resources relating to the application of interview techniques and verbal communication skills.

Block 4: Preparing a project proposal and a final work-based learning plan

In this final block, which is also an eight week block, students will: review progress against the WLP and produce an updated version; prepare for their end of module assess by producing a final project proposal, demonstrating the application of interview techniques and verbal communication skills, and producing evidence to show how demonstrating the achievement of selected learning outcomes. The module will provide resources to help with producing a final project proposal, along with an associated business case, and provide resources relating to interview techniques and verbal communication skills.

Assessments

Assessment is through 3 TMAs (which relate to blocks 1 through 3) and an end of module TMA (which is similar to an EMA) which relates to block 4.

TMXY475 Apprenticeship computing & IT project 

The final module, TMXY475, the Apprenticeship Computing and IT Project will enable students to complete their degree apprenticeship. It gives students the opportunity to make use of their knowledge and skills they have built up earlier, and to demonstrate these in a work-based project.

Students are to choose a project in the area of their specialism using knowledge, skills and behaviours learned in their modules to date especially the specialist Level-3 modules.

They will first be required to develop a project topic to suit their individual purposes, interests and skills by an iterative process of refinement towards a more narrowly-focussed area of study. This refining process will be moderated and guided by contact with their tutor and in collaboration with their employer, entailing increasing research as they proceed. In this way they will be laying the groundwork for their project as they home in on their final topic.

Arriving at an agreed project title and aims will include a consideration of its background (through a literature search), its feasibility and a definition of its scope. Assessing this is the task of TMA01 which will also require evidence of Interaction between student, tutor and employer. Students will then be expected producing a project plan and detailed project outline as their second TMA before writing-up a complete first draft of part of their project report which is submitted as TMA03.

The EMA has two parts. The final project report is submitted as the EMA part 1. Students will be asked to complete a 30-minute presentation/interview with an assessor and their employer following the submission of the project report for EMA part 2.

Throughout the module students are asked to reflect critically on how they undertook their project and how they might do things differently in the light of their experience. Students will be expected to produce a large proportion of their work independently and without close supervision.

To summarise, students will be expected to:

  • confirm and justify your choice of project (either the one you picked in TMXY350, or a new one if your critical evaluation leads you to change your project topic)
  • define what the outcomes of the project will be
  • plan how you are going to achieve these outcomes
  • research the background and state of the art of the subject area of your project
  • complete the project
  • produce a report describing the project and reflecting on both the project itself and the way you went about it.

The module is divided into a number of phrases, which are similar to the blocks that students would have seen in previous modules:

Phase 1: Project approval

During this phase, students will be working with their module tutor and employer to refine their project idea so that it meets the requirements for the apprenticeship and organisation.

Phase 2: Setting the project context

During this phase, students will be investigating the context of their project. This will involve tasks such as: refining requirements, understanding previous professional and academic work done in the area of your project both inside and outside of your organisation, and making progress on appropriate practical elements.

Phase 3: Practical report

During this phase, students will complete the bulk of the practical work. By the end of this phase, students should have an incomplete draft of your EMA project report which provides the basis for TMA 03.

Phase 4: Completing practical work

During this phase, students will complete all remaining practical work, and address any major issues identified in TMA 03.

Phase 5: Reviewing and evidencing learning

During this final phase, you will complete your EMA project report and prepare it for submission. There will also be an opportunity to review and act on any feedback from the Gateway/Professional Practice meeting.

Assessments

The module is assessed through3 TMAs, which reflect different phases of the project, and there are 2 parts to an EMA, one of which is a presentation.

Reflections

One thing that really struck me, when editing together this blog was how thorough the programme is. It is, for a moment, useful think of the degree apprenticeship as having three components: the academic study, the actual work that takes place in the workplace, and these work-based learning modules. In some senses, these modules represent a bit of useful glue, that links the academic study together with what takes place within the workplace.

Reviewing a part of this degree apprenticeship programme has made me reflect on my own professional context and work setting. It has helped me to ask some useful questions about my situation, such as: what learning should I be doing to either develop myself or to improve my performance? Another question is: where is my main work focus? Also, if I want to change my focus, what should I start to be doing so I can get there? By asking these questions, and writing this section I am doing something that is emphasised throughout all these modules: engaging in critical reflection.

Acknowledgements

This post has been compiled and edited together from a variety of different sources. Thanks are extended to Andy Hollyhead, who plays an important role in the delivery of the DTS degree apprenticeship scheme in England and provided some of the useful text for the project module. Thanks are also extended to the module chairs and curriculum managers of all the modules that are mentioned in this summary; their words, through project descriptions and summaries, have found their way to this post.

Permalink
Share post
Christopher Douce

Degree apprenticeship practice tutor development event May 21

Visible to anyone in the world

In addition to being a staff tutor and module tutor, I’m also a practice tutor (PT) . A practice tutor is someone who supports the delivery of the university’s DTS (digital and technology solutions professional) degree apprenticeship programme. There is an important difference between the PT and an OU academic tutor. In the DTS scheme, PT is one of the key individuals in the student’s journey. The role of the PT is to provide a consistent link between the apprentice’s world of work and academic study.

On 15 May 21 I attended what was called a practice tutor development day. The aim of this event was to provide further training and development for practice tutors, and to enable practice tutors to share experiences with each other and the apprenticeship delivery team.

This blog presents a sketch of what was covered during the day. I’m sharing these notes just in case it might be useful for fellow delegates (and fellow practice tutors), or anyone else who might be interested in how the OU is supporting its degree apprenticeship programme. It also represents a summary of one of the useful CPD events that have taken place over the year.

Preparing for Ofsted

This first section was facilitated by Andy Hollyhead, Chris Thomson and Craig Jackson, but much of the material for this session was delivered by Craig, who began with a question: what would the result of a negative inspection be?

Craig presented a broad summary of the Ofstead assessment process, saying something about what happens when an assessment takes place. I noted that four areas will be judged: the quality of education, behaviour and attitudes, personal development, and leadership and management. Craig mentioned that “some inspectors will look at specific areas, such as leadership and management”.

Different types of documents may be scrutinised to gain a sense of what is happening and how learners are progressing. Inspectors may scrutinise how improvements are measured and made and may speak to different members of staff, including apprentices, practice tutors, line managers, central academics, managers and leaders from the ‘training provider’. A decision about a rating will be made via trangulation; looking at different bits of evidence to come to a final decision.

Before moving onto the next session, I noted down a few relevant points that were made by Chris: the role of a PT is to map academic wok to job activities. I also noted that work based learning modules are focussed on work based skills that are not technical in nature, such as project management and personal management.

Tripartite meetings: good practice

This next session, which was about facilitating meetings with apprentices and employers, was facilitated by Alison Leese. Alison began with an important question: why are the review meetings important? They can be used to manage expectations, establish and review individual learning plans, set and plan to achieve success, to share perspectives, they can be used to identify challenges, and to provide feedback.

For the first meeting, it is important to scheduled and prepare for it, and it should be an opportunity to finalise an individualised learning plan and prepare for the first review.

In normal circumstances, there should be one face to face meeting per year. The first meeting is likely to take place face to face. During this fort meeting, there should be the sharing of roles and responsibilities; a discussion about what everyone does, and the introduction of the concept of the module (academic) tutor, and highlighting other roles that exist within the background, such as a staff tutor (a practice tutor line manager), and the Apprentice Programme Delivery Manager, who liaises with the employer or line manager. I noted down the point that the line manager must provide sufficient diversity within a job role to ensure that sufficient experience is gained to enable the learning outcomes of the DTS scheme to be met.

For each progress review, it is important to effectively schedule and prepare. Progress should be documented (currently through the university ePortfolio system) and objectives reviewed. An apprentice’s individual learning plan should be updated should there have been any changes in the apprentice’s situation, such as working location or accessibility needs. After every quarterly review, everything should be finalised within a 10 working day period.

Some points I noted down during the session were: use an initial meeting agenda/checklist, and for each progress review have a review checklist or agenda which may contain points such as: update ILP, objectives and gateway requirements (such as English and Maths skills). I also noted down that there was some cross-faculty induction material that was available on the apprentice hub, such as a summary of Kolb’s experiential learning cycle.

Practice tutors should refer or apprentices if an apprentice is not making sufficient progress, needs additional support, requests change of study programme, or isn’t being provided with the very important 20% off the job time (Gov.uk website), there is a change in job roles, or the line manager is not engaging sufficiently.

Safeguarding at the OU

Safeguarding is the process of protecting children and vulnerable adults from neglect. This is an important subject since the university has over two thousand registered students who are under the age of 18. The OU safeguarding team works with the OU student’s association, the student support teams, and the student resource and support centres (SRSC).

At the start of the section we were asked: how might PTs have contract with safeguarding in their roles? There might be phone calls or emails, or disclosures that take place in other ways, such as through assessments or one to one support sessions.

The university has a responsibility to support its students, and their children, or any vulnerable adults who a student might be looking after. The terminology used to refer to a vulnerable adult is different in different parts of the UK. In Wales the term is: an “adult at risk”. In Scotland, the term is “protected adult”.

An important point was made during this session, which was: “working with apprentices means that they [the student or the apprentice] are supported not just by the OU but also by their employer”.

To refer a student, an email could be sent directly to the safeguarding team, or a webform could be submitted.

Apprentice onboarding, on programme support and offboarding

This session was jointly facilitated by Nathalie Collins, Jackie Basquille and Charlotte Knock. Jackie began by speaking about the functional skills team. Degree apprentice students must gain the equivalent of A* to C, or scores 4 to 9 in Maths and English by the end of their studies. During the onboarding process (or, induction, as I call it), students will carry out a skills audit, will be interviewed, and there will be a review of their job role.

The onboarding (induction) process was summarised as follows: an information advice and guidance seminar, sharing of evidence of a link between job role and a chosen apprenticeship scheme, a core and specialism skills audit (the core skills audit refer to essential knowledge, skills and behaviours), a one to one discussion with an apprenticeship programme delivery manager, and the checking of prior qualifications. All this leads to a signed commitment statement and apprenticeship agreement (which gets stored to the ePortfolio system). When this is done, there is then an induction webinar.

Sometimes apprentices may require breaks in learning; a subject covered by Charlotte. There is an important difference between a break in learning (BiL) and a deferral. A deferral is a postponement of an exam or an equivalent assessment. A break in learning is possible due to a recognised number of reasons, such as (1) an economic reason, (2) long term sickness, (3) maternity leave, (4) religious trips, and (5) Covid related reasons.

The process for a break in learning begins a discussion with a practice tutor, who then speak with an ADPM, who then contacts the organisation apprentice lead. Whether a break is possible or not may depend on exactly where the apprentice is in their studies. An apprentice lead within an employer organisation will need to “sign off”, or approve a break in studies.

Building practice

The final part of the day was all about sharing experiences. We were put into small breakout rooms (with approximately 6 colleagues, mostly fellow practice tutors) where we began to share experiences of facilitating review meetings. We also looked at a short case study, and then went on to discuss the challenges we uncovered in a plenary room.

Resources

During the event, I collected some links to useful resources that were shared through the text chat channel.

Apprentices who are enrolled within the Digital and technology solutions programme are able to access the Apprentices studying the DA DTS site. Practice tutors can also access this page to get an understanding of what students can see.

Practice tutors can access an interactive mapping template (OU apprenticeship pages), which shows the connection between modules, apprenticeship specialisms and the criteria of the qualification. This page also provides a link to a more detailed mapping tool (OU apprenticeship pages).

Reflections

In my very early days of being a practice tutor, I wasn’t entirely whether I was doing the right thing. I enjoyed my first meetings with the new apprentice students and their employers. To prepare, I arrived with meetings armed with a summary of the programme, and I talked everyone through the principles of OU study and what it meant, and then summarised the programme that an apprentice was about to start. Although I seemed to be doing the right thing, I wasn’t completely sure whether I was doing everything right.

I found this session really helpful, since I felt it consolidated some of my knowledge and understanding, emphasised the importance of certain deadlines and activities, and also gave me a steer towards some useful resources which I could use with apprentices during some of their meetings. During the next meetings, I’m definitely going to take the apprentices through the mapping tool, either during online or during face to face meetings.

There were a couple of tools that I heard about that I didn’t know too much about: there were the checklists for the meetings that I need to find, and there’s the practice tutor eTMA system, where we can get more of a view about how an apprentice is getting along. On this point, I need to be clear about boundaries and responsibilities: my role is to help apprentices connect their assessments and academic study to work activity.

One activity that I need to do is to get a more thorough and detailed understanding of the work-based learning modules. I guess that every practice tutor has slightly different levels of understanding of the different modules that their apprentice students’ study. Being an academic tutor on one of the modules on a shared pathway, I feel as if I’ve got a pretty good (if broad) handle on the academic modules. I do feel as if I need to find the time to really nail down my understanding of some of the later work based learning modules. Perhaps this will be the subject of my next apprenticeship blog.

Acknowledgements

This event was organised by the Computing and Communications English apprenticeship team, which comprises of Andy Hollyhead and Chris Thomson. Acknowledgements are also extended from the wider university apprenticeship team who are based in the Business Development Unit (BDU).

Permalink Add your comment
Share post

This blog might contain posts that are only visible to logged-in users, or where only logged-in users can comment. If you have an account on the system, please log in for full access.

Total visits to this blog: 2268748